Phoenix Evolution

Welcome to the Next EVOLUTION of Hydronics

THE PHOENIX® EVOLUTION – the one appliance that Does it all!
The PHOENIX® EVOLUTION combines space heating, domestic hot water, and total system control into one compact, high efficiency mod-con unit.

Innovation - The Most Innovative Hot Water And Heating System In The World Today.

Product Versatility - Imagine a system that can provide hot water for the domestic system, radiant heating, hydro air and even solar assist all in one appliance. With the Phoenix® Evolution the designer has an extremely versatile appliance that can be used in many commercial and residential applications.

Space Savings - Imagine fitting a 55 gallon water heater, 135,000 BTU boiler, and buffer tank into a space as small as 34” x 53”. The new Phoenix® Evolution does it!

Features

96% Efficient
Hydraulic Stabilization
Highly Efficient Condensing Technology
Saves Fuel – Modulation Matters
Total System Control
Virtually Maintenance Free
Space Savings

Domestic Hot Water
Modern homes along with current lifestyles, multiple bathrooms and whirlpool tubs need larger amounts of hot water to meet peak demands. The Phoenix EvolutionTM is capable of delivering up to 314 gallons of Hot Water in the first hour with the added benefits of 96% Thermal Efficiency and an insulated tank that only looses a 1?2 degrees per hour in standby heat loss.

System Flexibility
The Phoenix EvolutionTM comes standard with Auxiliary Ports on the domestic storage side that allow contractors additional flexibility to easily install extra storage tanks or connect air handlers directly to the system. Whatever your requirements, the new Phoenix EvolutionTM can provide abundant hot water in one compact highly efficient appliance.

Hydronic Space Heating

The Phoenix Evolution’sTM advanced Mod-Con technology delivers a thermal efficiency of 96% along with utilizing a 0 to 10 Volt variable speed pump to reduce electrical and gas consumption without sacrific- ing comfort. The high output heat exchanger generates up to 135,000 BTU/hr for space heating, with system isolation for low temperature base- board, radiant heating and hydro air applications built in.

Phoenix EvolutionTM – the one appliance that Does it all!

The Phoenix EvolutionTM has just five easy piping connections – supply and return for heating, inlet and outlet for DHW and system feed – and you’re done. It’s cost effective and free of clutter. There’s no primary-secondary loop to install, no near boiler piping, no boiler/indirect electrical connections, and no isolation valves to install.

Hydraulic Stabilization
The integrated space heating module utilizes the hydraulic mass stored in the tank to provide an abundant supply of energy for heat transfer. The thermal mass allows the appliance to draw heated water continuously from the tank which provides hydraulic stabilization to the system and prevents short cycling. The entire unit is 96% thermal efficient and the tank only loses a 1?2 degree per hour in standby heat loss. This allows the space heating module to utilize water from the DHW system efficiently without repetitive cycling of the burner.

Highly Efficient Condensing technology
The major advantage of condensing technology is to extract more heat from the exhaust gas compared to conventional systems. The Heat Exchanger incorporates a larger surface area constructed of high quality 90/10 curpo- nickel which allows the unit to extract all of the latent energy from the water vapor contained within the exhaust gas. This reclamation of energy allows the appliance to use less energy to meet desired heating loads.

Saves Fuel – Modulation Matters
The Phoenix EvolutionTM has an outstanding 3 to 1 turndown ratio on the main combustion system and a 10 to 1 turndown ratio on the space heating module. Greater turndown allows this appliance to modulate at lower firing rates which conserves energy and improves component reliability. Modulation, along with thermal mass, eliminates the short cycling effect of small zones or minimal DHW draws.

Virtually Maintenance Free
The Phoenix EvolutionTM is a virtually maintenance free appliance. The robust material and sophisticated design of the appliance’s heat exchanger minimizes buildup of lime and scale associated with hard water areas. The 5” diameter combustion tube and 1 1/8” secondary heat exchange spirals greatly enhance heat transfer and eliminate the blockage risk of small passage ways that exist in low mass boilers.